2015-2016 - page 83

EASTERN IDAHO TECHNICAL COLLEGE_ ___________________________________________________________ 2015-2016
82
WLD 120 Basic Arc Welding I
2 Credits
The student will be able to identify types of welding machines,
properties, and electrodes. This course enables a student to weld
thicknesses from 1/2 inch to 1/8 inch sheet metal according to
AWS and ASME specifications in a flat position. FA/SP
WLD 121 Basic Arc Welding II
2 Credits
This course is a continuation of WLD 120 . Instruction is given
on the use of 60 series electrodes and their advantages. Students
will join two plates forming a “Tee”, lap, corner and butt joints
welding in a vertical and horizontal position according to AWS
and ASME specifications for these positions. FA/SP
WLD 123 Metallic Inert Gas Welding I
2 Credits
Instruction is given on GMAW (gas metal arc welding) using
solid wires with short circuit and spray type wire transfers.
Instruction is given in the hands on application of forming “Tee”,
Lap, Butt, and corner welds according to AWS and ASME
standards in the flat and horizontal positions. FA/SP
WLD 124 Metallic Inert Gas Welding II
2 Credits
This course is a continuation of WLD 123 with instruction given
on “Tee”, lap, corner, and butt joints in flat, vertical, and
overhead positions according to AWS and ASME standards. FA/
SP
WLD 125 Flux Cored Arc Welding
1 Credit
This course is a continuation of WLD 123 and WLD 124.
Students will continue welding in the flat, vertical, horizontal
and overhead positions, welding with flux cored type wires
according to AWS and ASME specifications. FA/SP
WLD 201 Tungsten Inert Gas Welding
4 Credits
The student will be enabled to properly adjust the TIG welders
for welding carbon, stainless and aluminum plates, to fabricate
Tee, Lap, Butt, and Corner joints in all four positions. Student
will also learn to weld open root single-V groove joints to AWS
specifications. FA/SP
WLD 202 Pipe Welding
4 Credits
The student will weld on stainless and black pipe from 2 1/2”
schedule 40 to 6” schedule 80 using GMAW, GTAW and SMAW
welding processes. Pipe will be welded in the 5G and 6G AWS
test positions to AWS standards. FA/SP
WLD 204 Testing and Qualifications
4 Credits
Course will emphasize ASME and AWS welding test procedures
on SMAW, GMAW, and GTAW. Testing will be done in all four
positions and will include reading blueprints, welding symbols,
and shop math. SP
WLD 205 Applied Work Experience
4 Credits
This course provides students the opportunity to put into
practice, in “real life” situations, skills that have been learned in
the classroom and laboratory. Ideally, the applied work
experience will be conducted in cooperation with a local
employer; however, arrangements for an on campus experience
can be made pending instructor approval. SP
WLD 206 Non Destructive Evaluation
1 Credit
This is an introductory course that will focus on nondestructive
and destructive techniques for assessing different welds.
Methods covered include Dye Penetrant Testing, Magnetic
Particle Testing, Ultrasonic Testing, and an introduction to
Radiography. FA
WLD 220 Tungsten Inert Gas Welding I
2 Credits
Students will be given instruction on proper uses and
adjustments of TIG machines. Students will be given
instruction on theory and hands-on procedures for welding
aluminum, stainless steel, and carbon steel, in flat position using
“Tee”, lap, butt, and corner joints according to AWS and ASME
standards. FA/SP
WLD 221 Tungsten Inert Gas Welding II
2 Credits
This is a continuation of WLD 220. Students get instruction
in aluminum, stainless steel, and carbon steel in flat, vertical,
and overhead position using “Tee”, lap, butt, and corner joints
according to AWS and ASME standards. FA/SP
1...,73,74,75,76,77,78,79,80,81,82 84,85,86,87,88,89,90,91
Powered by FlippingBook